Cleaning Power for Gas Turbines

Ecolink provides two products for powerful gas turbine cleaning. Both Zok mx® and Zok 27® are fantastic tools for cleaning turbines.

Powerful on-line and off line compressor cleaning fluid for gas turbines in aviation, industrial, offshore, and power generation applications.

The regular washing of gas turbines compressors is know to provide the most effective method of preventing long term compressor fouling. It ensures maximum available power output, improved fuel efficiency and reduced wear and tear on components, such as bearings and blades.

Online washing (hot washing) can significantly extend the period between necessary shutdowns for off-line washing, thus reducing costly downtime and lost production.

Zok mx® is an concentrated water-based, non-flammable environmentally friendly biodegradable fluid. Specifically developed for heavy-duty cleaning of gas turbine engine compressors. It’s a special blend of non-ionic surfactants, organic solvents, and demineralized water.

The shelf life for Zok mx® is 5 years and the pH value ranges from 8.0-8.5. The application for this product is spray ring or lance in either motor-over (off-line) or fired (on-line) wash as directed by the engine manufacturers in the quantities recommended by them.

zok products

This non-flammable product comes packaged in both bulk and small quantities! Want to learn more? Call Jimmy at 800 563-1305 x 104 or email Jimmy to buy or request a FREE quote!

Zok 27® is a concentrated neutral water-based detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine engines compressors. It’s a blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralized water.

To apply this product, spray ring or lance in either motor-over (off-line) or fired (on-line) wash as directed by the engine manufacturers in the quantities recommended by them. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine cooling bald holes.

The unique corrosion inhibitor allows engines to be left ready for instant restart, even in salty offshore conditions.

Interested in learning how to make your job easier? Call Jimmy at 800 563-1305 x 104 or email Jimmy for more information or buy or request a FREE quote!

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *