Environmentally Preferred Low VOC Solvent
|Product Data Sheet||Material Safety Data Sheet|
NAVSOLVE® is a low VOC (<25 gm/l) degreaser designed to replace P-D-680, Stoddard Solvent, and MIL-PRF-680 parts washer solvents. It conforms to MIL-PRF-32295A Type II. NAVSOLVE® is safe for use on ferrous and non-ferrous metals.
NAVSOLVE® is strong enough to remove grease, fuel oil, carbon and organic resins yet safe on most painted surfaces.
- Excellent solvency for a wide range of soils
- Controlled evaporation
- Leaves no residue
- Low odor
- Low VOC – meets stringent air quality standards and is certified to the South Coast Air Quality Clean Air Solvent Certification program.
- Meets MIL-PRF-32295A Type II
Use undiluted. NAVSOLVE® works very well in a drum mounted parts washer or any immersion tank. (Not for use in high pressure enclosed cabinets.) You may also spray or wipe NAVSOLVE® on a surface to be cleaned. Oil, dirt and carbon will flow off surface. If additional cleaning is required, re-apply and agitate with rag or brush. To speed evaporation, use compressed air or wipe with a dry rag.
Key Physical Characteristics
|Appearance||Clear colorless liquid|
|Flash Point, Tag Closed Cup||>60° C|
|Evaporation Rate (nBuAc=1)||<1|
|Vapor Pressure (mm Hg)||<0.5 @ 20°C|
|VOC Content||<25 grams/liter|
|Distillation Range||Approx. 185 – 205° C|
|Shelf Life||2 Years Minimum|
(N/A = Not Applicable N/E = Not Established)
Safety and Handling Precautions
NAVSOLVE® is a combustible material that should never be used around open flames, (welding torches, for example). Always use with adequate ventilation. Rubber gloves are recommended. Place rags in a metal sealable container after use. Keep container closed. Avoid excessive contact with fumes or liquid. Consult MSDS.
|Product Name||Part No.||Packaging||National Stock No.|
|NAVSOLVE®||55 Gal Drum|
|NAVSOLVE®||15 Gal Drum|
|NAVSOLVE®||5 Gal Pail|
|NAVSOLVE®||4 x 1 Gal.Case|